Configuring Igmp Snooping Trace Operations - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide
Related
Documentation

Configuring IGMP Snooping Trace Operations

486
Understanding IGMP Snooping on page 473
Host-Side Interfaces and IGMP Snooping Proxy Mode on page 477
Multicast-Router Interfaces and IGMP Snooping Proxy Mode on page 476
Tracing operations record detailed messages about the operation of routing protocols,
such as the various types of routing protocol packets sent and received, and routing policy
actions. You can specify which trace operations are logged by including specific tracing
flags. The following table describes the flags that you can include.
Flag
all
client-notification
general
group
host-notification
leave
normal
packets
policy
query
report
route
state
task
timer
You can configure tracing operations for IGMP snooping globally or in a routing instance.
The following example shows the global configuration.
Description
Trace all operations.
Trace notifications.
Trace general flow.
Trace group operations.
Trace host notifications.
Trace leave group messages (IGMPv2 only).
Trace normal events.
Trace all IGMP packets.
Trace policy processing.
Trace IGMP membership query messages.
Trace membership report messages.
Trace routing information.
Trace state transitions.
Trace routing protocol task processing.
Trace timer processing.
Copyright © 2017, Juniper Networks, Inc.