Juniper ACX1000 Configuration Manual page 618

ACX Series Universal Access Router Configuration Guide
Meaning
Purpose
Action
Purpose
560
State: <Active Int>
Age: 2:22:40
Validation State: unverified
Task: LDP
Announcement bits (1): 0-Resolve tree 1
AS path: I
The output shows all the routes in the routing table of Device R6.
Verifying the LDP Routes
Verify the automatically targeted LDP routes.
From operational mode, enter the
user@R6> show ldp session auto-targeted detail
Address: 4.4.4.4, State: Operational, Connection: Open, Hold time: 28
Session ID: 7.7.7.7:0--4.4.4.4:0
Next keepalive in 8 seconds
Active, Maximum PDU: 4096, Hold time: 30, Neighbor count: 1
Neighbor types: auto-targeted
Keepalive interval: 10, Connect retry interval: 1
Local address: 7.7.7.7, Remote address: 4.4.4.4
Up for 02:28:28
Capabilities advertised: none
Capabilities received: none
Protection: disabled
Session flags: none
Local - Restart: disabled, Helper mode: enabled
Remote - Restart: disabled, Helper mode: enabled
Local maximum neighbor reconnect time: 120000 msec
Local maximum neighbor recovery time: 240000 msec
Local Label Advertisement mode: Downstream unsolicited
Remote Label Advertisement mode: Downstream unsolicited
Negotiated Label Advertisement mode: Downstream unsolicited
MTU discovery: disabled
Nonstop routing state: Not in sync
Next-hop addresses received:
4.4.4.4
30.1.1.2
40.1.1.1
128.92.25.37
Verifying the OSPF Routes
Display all the LDP backup routes in the OSPF routing table of Device R6.
Metric: 1
show ldp session auto-targeted detail
Copyright © 2017, Juniper Networks, Inc.
command.