Configuring Vlan-Specific Igmp Snooping Parameters - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide
Related
Documentation

Configuring VLAN-Specific IGMP Snooping Parameters

478
query-response-interval seconds;
robust-count number;
vlan vlan-id {
immediate-leave;
interface interface-name {
group-limit limit;
host-only-interface;
immediate-leave;
multicast-router-interface;
static {
group ip-address {
source ip-address;
}
}
}
proxy {
source-address ip-address;
}
query-interval seconds;
query-last-member-interval seconds;
query-response-interval seconds;
robust-count number;
}
}
You can include this statement at the following hierarchy levels:
[edit bridge-domains bridge-domain-name protocols]
[edit routing-instances routing-instance-name bridge-domains bridge-domain-name
protocols]
By default, IGMP snooping is not enabled. Statements configured at the VLAN level apply
only to that particular VLAN.
Multicast Overview
Understanding Multicast Snooping
All of the IGMP snooping statements configured with the
the exception of the
traceoptions
at the VLAN level. To configure IGMP snooping parameters at the VLAN level, include
the statement:
vlan
vlan vlan-id;
immediate-leave;
interface interface-name {
group-limit limit;
host-only-interface;
multicast-router-interface;
static {
group ip-address {
igmp-snooping
statement, can be qualified with the same statement
Copyright © 2017, Juniper Networks, Inc.
statement, with