Chrysler 2005 Crossfire SRT6 Service Manual page 354

5 - 188 BRAKES - ABS ELECTRICAL DIAGNOSTICS
1120-LEFT REAR WHEEL SPEED SENSOR CIRCUIT (CONTINUED)
2.
INSPECT THE LEFT REAR WHEEL SPEED SENSOR
Turn the ignition off.
Inspect the Left Rear Wheel Speed Sensor and connector.
Is the Sensor or Connector damaged?
Yes >> Repair as necessary.
Perform ABS VERIFICATION TEST.
No >> Go to 3
3.
MEASURE THE VOLTAGE OF THE LEFT REAR WHEEL SPEED SENSOR 12 VOLT SUPPLY CIRCUIT
With the ignition off.
Disconnect the Left Rear Wheel Speed Sensor harness connector.
Note: Check connectors - Clean/repair as necessary.
Turn the ignition on.
Measure the voltage of the Left Rear Wheel Speed Sensor 12 Volt
Supply circuit at the Left Rear Wheel Speed Sensor harness connec-
tor.
Is the voltage above 10 volts?
Yes >> Go to 8
No >> Go to 4
4.
MEASURE THE VOLTAGE OF THE LEFT REAR WHEEL SPEED SENSOR 12 VOLT SUPPLY CIRCUIT
Turn the ignition off.
Measure the voltage of the Left Rear Wheel Speed Sensor 12 Volt
Supply circuit at the Left Rear Wheel Speed Sensor harness connec-
tor.
Is the voltage below 1.0 volt?
Yes >> Go to 6
No >> Go to 5
ZH