Chrysler 2005 Crossfire SRT6 Service Manual page 305

ZH
1035-CAN COMMUNICATIONS - NO MESSAGE FROM STEERING ANGLE SENSOR (CONTINUED)
7.
MEASURE THE STEERING ANGLE SENSOR GROUND CIRCUIT RESISTANCE
Turn the ignition off.
Measure the resistance between ground and the Sensor Ground cir-
cuit.
Is the resistance below 5.0 ohms?
Yes >> Replace the Steering Angle Sensor. (Refer to 5 -
BRAKES/ELECTRICAL/STEERING ANGLE SENSOR -
REMOVAL).
Perform ABS VERIFICATION TEST.
No >> Repair the Sensor Ground circuit for an open.
Perform ABS VERIFICATION TEST.
BRAKES - ABS ELECTRICAL DIAGNOSTICS 5 - 139