Chrysler 2005 Crossfire SRT6 Service Manual page 339

ZH
1110-RIGHT FRONT WHEEL SPEED SENSOR CIRCUIT (CONTINUED)
7.
MEASURE THE RESISTANCE OF THE RIGHT FRONT WHEEL SPEED SENSOR 12 VOLT SUPPLY
CIRCUIT
With the ignition off.
Measure the resistance of the Right Front Wheel Speed Sensor 12
Volt Supply circuit from the CAB harness connector to the Right Front
Wheel Speed Sensor harness connector.
Is the resistance below 5.0 ohms?
Yes >> Go to 8
No >> Repair the Right Front Wheel Speed Sensor 12 Volt Sup-
ply circuit for an open.
Perform ABS VERIFICATION TEST.
8.
MEASURE THE RESISTANCE OF THE RIGHT FRONT WHEEL SPEED SENSOR SIGNAL CIRCUIT
With the ignition off.
Reconnect the CAB harness connector.
Measure the resistance between ground and the Right Front Wheel
Speed Sensor Signal circuit.
Is the resistance less than 100 ohms?
Yes >> Go to 11
No >> Go to 9
BRAKES - ABS ELECTRICAL DIAGNOSTICS 5 - 173