Table of Contents
Advertisement
User Interface Commands
terminal length
terminal length
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Current CLI Privilege is 15
To modify the terminal print length, use the terminal length Privileged EXEC mode
command.
To revert to its default setting, use the no form of this command.
Syntax
length
terminal length
no terminal length
Parameters
length
•
—Length of rows for each print. (0 means no limit.)
Default Configuration
The default terminal length is 20.
Command Mode
Privileged EXEC mode
Example
The following example changes the terminal length to 5:
switchxxxxxxx# terminal length 5
switchxxxxxxx# show version
Cisco Sx220 Series Switch Software, Version 1.0.0.16, RELEASE SOFTWARE
Copyright (c) 2014 by Cisco Systems, Inc.
Compiled Wed Feb 26 16:02:49 UTC 2014
ROM: Bootstrap program is Sx220 boot loader
BOOTLDR: Sx220 Boot Loader Version , RELEASE SOFTWARE
Compiled
switchxxxxxx uptime is 1 days, 1 hours, 34 mins, 31 secs
system image is image-2
Processor 500MHz , with 128M bytes of memory.
28 Gigabit Ethernet interfaces
0 Fast Ethernet interfaces
39
488
Advertisement
Table of Contents
