Cisco 220 Series Smart Plus Reference Manual page 541

Voice VLAN Commands
show voice vlan
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Examples
Example 1—The following example displays the auto voice VLAN parameters (this
is independent of the voice VLAN state actually enabled).
switchxxxxxx# show voice vlan type auto
Voice VLAN ID
Voice VLAN VPT
Voice VLAN DSCP
Example 2—The following example displays the current voice VLAN parameters
when the voice VLAN state is auto-enabled.
switchxxxxxx# show voice vlan
Administrate Voice VLAN state
Voice VLAN ID
Voice VLAN VPT
Voice VLAN DSCP
Example 3—The following example displays the voice VLAN parameters when
both Auto voice VLAN and OUI are disabled.
switchxxxxxx# show voice vlan
Administrate Voice VLAN state
Voice VLAN ID
Voice VLAN VPT
Voice VLAN DSCP
Voice VLAN Aging
Voice VLAN CoS
Voice VLAN 1p Remark: disabled
Example 4—The following example displays the voice VLAN parameters when the
voice VLAN operational state is OUI.
switchxxxxxx# show voice vlan
Administrate Voice VLAN state
Voice VLAN ID
Voice VLAN VPT
Voice VLAN DSCP
Voice VLAN Aging
Voice VLAN CoS
Voice VLAN 1p Remark: disabled
: 1
: 5
: 46
: auto-enabled
: 1
: 5
: 46
: disable
: 1
: 5
: 46
: 1440 minutes
: 6
: oui-enabled
: 2
: 5
: 46
: 1440 minutes
: 6
40
491