Table of Contents
Advertisement
Configuration and Image File Commands
show running-config
show running-config
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To show the entire contents of the current Running Configuration file or show the
contents of the Running Configuration file for specific interfaces, use the show
running-config Privileged EXEC mode command.
Syntax
show running-config [interfaces
Parameters
•
interfaces
interface-list
interface IDs. The interface can be one of these types: Ethernet port or port
channel.
Command Mode
Privileged EXEC mode
User Guidelines
The Running Configuration file does not contain all of the information that can be
displayed in the output. Only nondefault settings are displayed.
Examples
Example 1—The following example shows the entire Running Configuration file:
switchxxxxx# show running-config
config-file-header
switchxxxxxx
v1.0.0.16
CLI v1.0
@
!
!
!
hostname "switchxxxxxx"
username "cisco" secret encrypted
ZmZmNzVhZTAzYjAyODkzZjlkM2JjZGIyMGYyMzY0NDM=
!
!
!
voice vlan oui-table add 00:E0:BB 3COM
voice vlan oui-table add 00:03:6B Cisco
voice vlan oui-table add 00:E0:75 Veritel
voice vlan oui-table add 00:D0:1E Pingtel
voice vlan oui-table add 00:01:E3 Siemens
interface-list
]
—(Optional) Specifies an interface ID or a list of
9
147
Advertisement
Table of Contents
