Table of Contents
Advertisement
LLDP Commands
show lldp med
show lldp med
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
System Capabilities Enable
Management Address : 192.168.1.254(IPv4)
To display the LLDP MED configuration for specific interfaces, use the show lldp
med Privileged EXEC mode command.
Syntax
show lldp [interfaces
Parameters
interface-id
•
interfaces
interface IDs. If not specified, the command displays information for all
interfaces.
Command Mode
Privileged EXEC mode
Examples
Example 1—The following example shows the LLDP MED configuration for all
interfaces:
switchxxxxxx# show lldp med
Fast Start Repeat Count: 3
lldp med network-policy voice: auto
Port
| Capabilities
------ + ------------- + -------------- + -------- + ----------+ -----
gi1 |
gi2 |
gi3 |
gi4 |
gi5 |
gi6 |
gi7 |
gi8 |
gi9 |
gi10 |
gi11 |
gi12 |
gi13 |
: Bridge
interface-id
] med
—(Optional) Specifies an interface ID or a list of
| Network Policy | Location | Inventory | POE
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
22
No |
No |
No
No |
No |
No
No |
No |
No
No |
No |
No
No |
No |
No
No |
No |
No
No |
No |
No
No |
No |
No
No |
No |
No
No |
No |
No
No |
No |
No
No |
No |
No
No |
No |
No
340
Advertisement
Table of Contents
