Table of Contents
Advertisement
User Interface Commands
exit (Configuration)
exit (Configuration)
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Command Mode
Privileged EXEC mode
Examples
The following example enters the privilege level 15:
switchxxxxxx> enable 15
Password:**********
switchxxxxxx#
To exit any mode and bring the user to the next higher mode, use the exit
command.
Syntax
exit
Parameters
N/A
Default Configuration
N/A
Command Mode
N/A
Example
The following example changes the configuration mode from the Interface
Configuration mode to the Global Configuration mode:
switchxxxxxx(config-if)# exit
switchxxxxxx(config)#
39
483
Advertisement
Table of Contents
