Gvrp Vlan-Creation-Forbid - Cisco 220 Series Smart Plus Reference Manual

GVRP Commands

gvrp vlan-creation-forbid

gvrp vlan-creation-forbid
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Example
The following example forbids dynamic VLAN registration on fa2:
switchxxxxxx(config)# interface gi2
switchxxxxxx(config-if)# gvrp registration-mode forbidden
To disable dynamic VLAN creation or modification, use the gvrp vlan-creation-
forbid Interface Configuration mode command.
To enable dynamic VLAN creation or modification, use the no form of this
command.
Syntax
gvrp vlan-creation-forbid
no gvrp vlan-creation-forbid
Parameters
N/A
Default Configuration
Dynamic VLAN creation is enabled.
Command Mode
Interface Configuration (Ethernet, port channel) mode
Example
switchxxxxxx(config)# interface gi3
switchxxxxxx(config-if)# gvrp vlan-creation-forbid
12
181