Table of Contents
Advertisement
SNMP Commands
show snmp-server engineid
show snmp-server engineid
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Field
Access
To show the SNMPv3 engine IDs defined on the switch, use the show snmp-server
engineid Privileged EXEC command.
Syntax
show snmp-server engineid
Parameters
N/A
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show snmp engineid
Local SNMPV3 Engine id: 00036D001000
IP address
----------------------------------------------------------------------------
192.168.1.55
Total Entries: 1
Description
Community access level. The options are:
•
ro—(Read Only) Management access is
restricted to read-only. Changes cannot be
made to the community.
•
rw—(Read Write) Management access is
read-write. Changes can be made to the device
configuration, but not to the community.
Remote SNMP engineID
00036D10000A
32
431
Advertisement
Table of Contents
