Show Username - Cisco 220 Series Smart Plus Reference Manual

AAA Commands

show username

show username
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show passwords configuration
Passwords aging is enabled with aging time 180 days.
Passwords complexity is enabled with the following attributes:
Minimal length: 3 characters
Minimal classes: 3
New password must be different than the current: Enabled
Maximum consecutive same characters: 3
New password must be different than the user name: Enabled
To show all user accounts in local database, use the show username Privileged
EXEC mode command.
Syntax
show username
Parameters
None
Default Configuration
None
Command Mode
Privileged EXEC mode
Example
The following example shows information for all user accounts defined on the
switch:
switchxxxxxx# show username
Priv | Type |
-------+--------+--------------------------------+--------------------------
User Name | Password
3
64