Table of Contents
Advertisement
Address Table Commands
switchport port-security mode maximum
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
When the switchport port-security command enables a mode on a port differing
from the lock mode, all addresses learned on the port are deleted.
When the no switchport port-security maximum command cancels a secure mode
on a port, all secure addresses defined on the port are deleted.
Example
The following example discards all packets to gi 1 1 when the learning reaches the
address limit (50) without learning any more addresses of packets from unknown
sources, and sends the SNMP traps every 100 seconds if a packet with an
unknown source address is received.
switchxxxxxx(config)interface gi11
switchxxxxxx(config-if)# switchport port-security mode classic maximum 50
action discard-snmp-log trap-freq 100
5
100
Advertisement
Table of Contents
