Table of Contents
Advertisement
IPv6 MLD Snooping Commands
show ipv6 mld snooping mrouter
show ipv6 mld snooping mrouter
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
User Guidelines
To display information for all multicast groups learned by MLD snooping, use the
show ipv6 mld snooping groups command without parameters.
To display information for a subset of all multicast groups learned by MLD
snooping, use the show ipv6 mld snooping groups command with parameters.
Example
switchxxxxxx# show ipv6 mld snooping groups
VLAN
| Gourp IP Address |
------+------------------+--------+-----------+------------------
Total Number of Entry = 0
To display information for dynamically, static, or forbidden learned multicast router
port for all VLANs or for a specific VLAN, use show ipv6 mld snooping mrouter
Privileged EXEC mode command.
Syntax
show ipv6 mld snooping mrouter [dynamic | static | forbidden]
Parameters
•
dynamic—(Optional) Displays the dynamic groups.
•
forbidden—(Optional) Displays the forbidden routers.
•
static—(Optional) Displays the static groups.
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show ipv6 mld snooping mrouter
Dynamic Mrouter Table
VID
|
Port
| Expiry Time(Sec)
------+---------+------------------
Total Entry 0
Type
| Life(Sec) | Port
19
301
Advertisement
Table of Contents
