Copy - Cisco 220 Series Smart Plus Reference Manual

Configuration and Image File Commands

copy

copy
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To copy a source file to a destination file, use the copy Privileged EXEC mode
command.
Syntax
copy
Parameters
The following table displays the file options:
Keyword
backup-config
flash://
mirror-config
running-config
startup-config
tftp://
Command Mode
Privileged EXEC mode
User Guidelines
The entire copying process may take several minutes and differs from protocol to
protocol and from network to network.
Source or Destination
Backup configuration file. A configuration file can be
downloaded to this file (without giving a file name).
This can then be copied to the Running configuration
file or the Startup configuration file.
Copy from the flash file system.
Mirror configuration file. If the Running configuration
file and the Startup configuration file have been
identical for 24 hours, the Startup configuration file is
automatically copied to the Mirror Configuration file by
the system. It can then be copied to the Startup
configuration file or the Running configuration file if
required.
Currently Running configuration file.
Startup configuration file.
Copy from a TFTP server. The syntax for this alias is
tftp://host/[directory]/filename. The host can be either
identified by an IP address or a hostname.
9
133