Voice Vlan State - Cisco 220 Series Smart Plus Reference Manual

Voice VLAN Commands

voice vlan state

voice vlan state
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
switchxxxxxx(config)# voice vlan oui-table add 00:AA:BB experimental
To set the type of voice VLAN that is functional on the switch or to disable the
voice VLAN entirely, use the voice vlan state Global Configuration mode
command.
Syntax
voice vlan state {auto-enabled | disabled | oui-enabled}
Parameters
• auto-enabled—Sets the voice VLAN type to Auto.
• disabled—Disables the voice VLAN.
• oui-enabled—Sets the voice VLAN type to OUI.
Default Configuration
The voice VLAN type is set to Auto.
Command Mode
Global Configuration mode
User Guidelines
By default, CDP, LLDP, and LLDP MED are enabled on the switch. All ports are
members of the default VLAN (VLAN 1), which is also the default voice VLAN.
Example
switchxxxxxx(config)# voice vlan state auto-enabled
switchxxxxxx(config)# voice vlan state disabled
switchxxxxxx(config)# voice vlan state oui-enabled
The Voice VLAN for OUI cannot be the default VLAN
40
498