Table of Contents
Advertisement
STP Commands
show spanning-tree mst interfaces
show spanning-tree mst interfaces
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To show the MSTP instance information for specific interfaces, use the show
spanning-tree mst interfaces Privileged EXEC mode command.
Syntax
show spanning-tree mst
Parameters
•
instance-id
—The MSTP instance ID. (Range: 0 to 15)
interface-id
•
—An interface ID or a list of interface IDs. The interface can be
one of these types: Ethernet port or port channel.
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show spanning-tree mst 1 interfaces gi1
MST Port Information
============================================================
Instance Type : MSTI (1)
------------------------------------------------------------
Port Identifier : 128/1
Internal Path-Cost : 0
------------------------------------------------------------
Regional Root Bridge : 0/00:00:00:00:00:00
Internal Root Cost : 0
Designated Bridge : 0/00:00:00:00:00:00
Internal Port Path Cost : 200000
Port Role : Disabled
Port State : Disabled
------------------------------------------------------------
instance-id
interfaces
/200000
interface-id
33
423
Advertisement
Table of Contents
