Disable Proxy Service Using Netscape (Windows And Solaris); Remote Access To The Ons 15327; Tl1 Terminal Access To The Ons 15327 - Cisco ONS 15327 User Documentation
Hide thumbs
Also See for ONS 15327:
- Procedure manual (478 pages) ,
- Manual (42 pages) ,
- Reference manual (166 pages)
Table of Contents
Advertisement
Chapter 2
Software Installation
In the Control Panel window, choose Internet Options.
Step 2
Step 3
From the Internet Properties dialog box, click Connections > LAN Settings.
On the LAN Settings dialog box, either:
Step 4
•
or
•
Procedure: Disable Proxy Service Using Netscape (Windows and Solaris)
Complete these steps if your computer is connected to a proxy server and your browser is Netscape
Navigator.
Step 1
Open Netscape.
Step 2
From the Edit menu, choose Preferences.
In the Preferences dialog box under Category, choose Advanced > Proxies.
Step 3
Step 4
On the right side of the Preferences dialog box under Proxies, either:
•
or
•
2.4.3 Remote Access to the ONS 15327
You can use LAN modems to access ONS 15327s from remote sites. The LAN modem must be
connected to the RJ-45 port on an XTC card. The LAN modem must be properly configured for use with
the ONS 15327. When the modem is installed, dial-up access to the ONS 15327 is available using a PC
or Solaris workstation modem.
2.4.4 TL1 Terminal Access to the ONS 15327
You can communicate with the ONS 15327 using TL1. To connect a TL1 terminal (or a PC running
terminal emulation software) to the ONS 15327, you can:
•
June 2002
Deselect Use a proxy server to disable the service
Leave Use a proxy server selected and click Advanced. On the Proxy Setting dialog box under
Exceptions, enter the IP addresses of ONS 15327 nodes that you will access. Separate each address
with a semicolon. You can insert an asterisk for the host number to include all the ONS 15327s on
your network. Click OK to close each open dialog box.
Choose Direct connection to the Internet to bypass the proxy server
Choose Manual proxy configuration to add exceptions to the proxy server, then click View. On the
Manual Proxy Configuration dialog box under Exceptions, enter the IP addresses of the ONS 15327
nodes that you will access. Separate each address with a comma. Click OK to close each open dialog
box.
Use the DB-9 plug on the front panel of the XTC card.
You can connect to either the active or standby XTC DB-9 plug to gain terminal access, but not both
simultaneously.
Connecting PCs to the ONS 15327
Cisco ONS 15327 User Documentation
2-23
Advertisement
Table of Contents
