Table of Contents
Advertisement
IGMP Snooping Commands
ip igmp snooping vlan immediate-leave
ip igmp snooping vlan immediate-leave
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
User Guidelines
IGMPv1, IGMPv2, and IGMPv3 are supported.
Example
switchxxxxxx(config)# ip igmp snooping vlan 2
To enable the IGMP Snooping immediate leave processing on a VLAN, use the ip
igmp snooping vlan immediate-leave Global Configuration mode command.
To disable IGMP Snooping immediate leave processing, use the no form of this
command.
Syntax
ip igmp snooping vlan
no ip igmp snooping vlan
Parameters
VLAN-LIST
•
—A VLAN ID or a list of VLAN IDs. (Range: 1 to 4094)
Default Configuration
IGMP Snooping immediate leave is disabled by default.
Command Mode
Global Configuration mode
User Guidelines
You can execute the command before the VLAN is created.
Example
switchxxxxxx(config)# ip igmp snooping vlan 1 immediate-leave
VLAN-LIST
immediate-leave
VLAN-LIST
immediate-leave
13
204
Advertisement
Table of Contents
