Table of Contents
Advertisement
SNMP Commands
show snmp-server user
show snmp-server user
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Total Entries: 2
The following table describes the significant fields shown in the example:
Field
View Name
Subtree OID
OID Mask
View Type
To show all SNMP users defined on the switch, use the show snmp-server user
Privileged EXEC mode command.
Syntax
show snmp-server user
Parameters
N/A
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show snmp-server user
Username:
Password:
Access GroupName:
Authentication Protocol: md5
Encryption Protocol:
Description
SNMP view name.
Subtree Object ID . All descendents of this node are
included or excluded in the view.
Object ID mask.
Shows that the selected MIBs are included or
excluded in this view.
snmpuser
********
snmpgroup
none
32
436
Advertisement
Table of Contents
