Security-Suite Dos Ip Gratuitous-Arps - Cisco 220 Series Smart Plus Reference Manual

Security DoS Commands

security-suite dos ip gratuitous-arps

security-suite dos ip gratuitous-arps
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Example
switchxxxxxx(config)# interface gi6
switchxxxxxx(config-if)# security-suit dos
To enable gratuitous ARP protection on an interface, use the security-suite ip
gratuitous-arps Interface Configuration (Ethernet) mode command.
To disable this feature on an interface, use the no form of this command.
Syntax
security-suite dos ip gratuitous-arps
no security-suite dos ip gratuitous-arps
Parameters
N/A
Default Configuration
Disabled
Command Mode
Interface Configuration (Ethernet) mode
Example
switchxxxxxx(config)# interface gi10
switchxxxxxx(config-if)# security-suit dos ip gratuitous-arps
31
426