Ipv6 Mld Filter - Cisco 220 Series Smart Plus Reference Manual

IPv6 MLD Snooping Commands

ipv6 mld filter

ipv6 mld filter
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Parameters
N/A
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# clear ipv6 mld snooping statistics
To control whether or not all hosts on a Layer 2 interface can join one or more IPv6
multicast groups by applying a MLD profile to the interface, use the ipv6 mld filter
Interface Configuration mode command.
To remove a MLD profile from the interface, use the no form of this command.
Syntax
profile-number
ipv6 mld filter
no ipv6 mld filter
Parameter
profile-number
•
Default Configuration
No MLD profiles are applied.
Command Mode
Interface Configuration mode
User Guidelines
You can apply the MLD profiles only to Layer 2 physical or EtherChannel
interfaces.
A MLD profile can be applied to one or more switch interfaces, but one interface
can have only one profile applied to it.
—The MLD profile number to be applied. (Range: 1 to 128)
19
277