QoS Commands
show policy-map interface
show policy-map interface
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show policy-map
Policy Map policy1
class class1
set IP dscp 7
Policy Map policy2
class class 2
police 96000 exceed-action drop
class class3
police 124000 exceed-action policed-dscp-transmit
To show the policy map that is applied to an interface, use the show policy-map
interface Privileged EXEC mode command.
Syntax
show policy-map interface
Parameters
interface-id
•
—An interface ID or a list of interface IDs. The interface can be
one of these types: Ethernet port or port channel.
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show policy-map interface fa5
Interface
Input Policy
---------
-------------
fa5
pmap1
interface-id
28
403