Spanning-Tree Mst Port-Priority - Cisco 220 Series Smart Plus Reference Manual

STP Commands

spanning-tree mst port-priority

spanning-tree mst port-priority
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Default Configuration
The default is shared.
Command Mode
Interface Configuration (Ethernet, port channel) mode
Example
switchxxxxxx(config)# interface gi15
switchxxxxxx(config-if)# spanning-tree link-type point-to-point
To configure the priority of a port, use the spanning-tree mst port-priority
Interface Configuration mode command.
To revert to its default setting, use the no form of this command.
Syntax
instance-id
spanning-tree mst
no spanning-tree mst
Parameters
instance-id
• —The spanning tree instance ID. (Range: 0 to 15)
• priority —The port priority. (Range: 0 to 240)
Default Configuration
The default port priority is 128.
Command Mode
Interface Configuration (Ethernet, port channel) mode
User Guidelines
The priority value must be a multiple of 16.
port-priority
instance-id port-priority
priority
33
430