Show Ip Dhcp - Cisco 220 Series Smart Plus Reference Manual

IP Addressing Commands

show ip dhcp

show ip dhcp
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
IP Address: 192.168.1.254
Subnet Netmask: 255.255.255.0
Default Gateway: 192.168.1.1
To display the IP DHCP status, use the show ip dhcp Privileged EXEC mode
command.
Syntax
show ip dhcp
Parameters
N/A
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show ip dhcp
DHCP Status : disabled
14
235