Table of Contents
Advertisement
SNMP Commands
show snmp-server group
show snmp-server group
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
The following table describes the significant fields shown in the example:
Field
Local SNMPV3 Engine
id
IP address
Remote SNMP
engineID
To show all SNMP groups defined on the switch, use the show snmp-server group
Privileged EXEC mode command.
Syntax
show snmp-server group
Parameters
N/A
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show snmp-server group
Group Name
WriteView
------------------------------ ------ ------------ --------------------------
---- ------------------------------ ------------------------------
testgroup
all
Total Entries: 1
Description
Local SNMP engine ID of the switch.
IP address of the remote host that receives the traps.
Remote SNMP engine ID.
Model
Level
NotifyView
v1
noauth
all
32
ReadView
all
432
Advertisement
Table of Contents
