Table of Contents
Advertisement
Ethernet Configuration Commands
show errdisable recovery
show errdisable recovery
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
no jumbo-frame
Parameters
frame-size
•
—Maximum size of packet in bytes that the switch can support.
(Range: 1518 to 10000 bytes, default: 1522 bytes)
Default Configuration
Jumbo frames are disabled on the switch.
Command Mode
Global Configuration mode
User Guidelines
This command takes effect only after resetting the switch.
Example
The following example enables jumbo frames on the switch and sets the maximum
frame size to 1538 bytes:
switchxxxxxx(config)# jumbo-frame 1538
To show the error-disable recovery status and the interfaces in the error-disabled
state, use the show errdisable recovery Privileged EXEC Mode command.
Syntax
show errdisable recovery
Parameters
N/A
Default Configuration
N/A
Command Mode
Privileged EXEC Mode
11
163
Advertisement
Table of Contents
