Chapter 6: Bonjour Commands; Bonjour Enable - Cisco 220 Series Smart Plus Reference Manual

Bonjour Commands

bonjour enable

Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To enable Bonjour globally on the switch, use the bonjour enable Global
Configuration mode command.
To disable Bonjour, use the no form of this command.
Syntax
bonjour enable
no bonjour enable
Parameters
N/A
Default Configuration
Bonjour is enabled by default.
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)# bonjour enable
6
101