Table of Contents
Advertisement
IP ARP Inspection Commands
clear ip arp inspection statistics vlan
ip arp inspection
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To clear the Address Resolution Protocol (ARP) Inspection statistics for specific
VLANs, use the clear ip arp inspection statistics vlan Privileged EXEC mode
command.
Syntax
clear ip arp inspection statistics vlan
Parameters
VLAN-LIST—
•
A VLAN ID or a list of VLAN IDs. (Range: 1 to 4094)
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# clear ip arp inspection statistics vlan 1
To enable dynamic ARP inspection on the switch, use the ip arp inspection Global
Configuration mode command.
To disable dynamic ARP inspection on the switch, use the no form of this
command.
Syntax
ip arp inspection
VLAN-LIST
15
236
Advertisement
Table of Contents
