Table of Contents
Advertisement
Address Table Commands
show mac address-table aging-time
show mac address-table aging-time
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Default Configuration
If no parameters are entered, the entire table is displayed.
Command Mode
Privileged EXEC mode
User Guidelines
Internal usage VLANs that are automatically allocated on the routed ports are
presented in the VLAN column by a port number and not by a VLAN ID.
Example
Example 1—Displays the entire MAC address table:
switchxxxxxx# show mac address-table
VID
|
MAC Address
-----+-------------------+--------------+----------------
1 | 00:03:6D:00:01:20 |
1 | 00:10:60:DB:6E:FE |
1 | 10:8C:CF:CD:0C:05 |
Total number of entries: 3
Example 2—Displays the address entries containing the specified MAC address:
switchxxxxxx# show mac address-table 00:3f:bd:45:5a:b1 vlan 1
Aging time is 300 sec
VLAN
MAC Address
-------- ------------------
1
00:3f:bd:45:5a:b1
To show the MAC address aging time, use the show mac address-table aging-
time Privileged EXEC mode command.
Syntax
show mac address-table aging-time
|
Type
|
Management
| CPU
Dynamic
| fa1
Dynamic
| fa1
Port
------------ ----------
static
Ports
Type
fa9
5
95
Advertisement
Table of Contents
