Table of Contents
Advertisement
Telnet and SSH Commands
ip telnet server
ip telnet server
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
User Guidelines
The switch can be configured from a SSH server or Telnet (or both). To control the
switch configuration by Telnet, use the ip telnet server Global Configuration mode
command.
Example
switchxxxxxx(config)# ip ssh server
SSH daemon enabled.
To enable the Teletype Network (Telnet) service on the switch, use the ip telnet
server Global Configuration mode command.
To disable the Telnet service on the switch, use the no form of this command.
Syntax
ip telnet server
no ip telnet server
Parameters
N/A
Default Configuration
Telnet is disabled by default.
Command Mode
Global Configuration mode
User Guidelines
The switch can be configured from a SSH server or Telnet (or both). To control the
switch configuration by SSH, use the ip ssh server Global Configuration mode
command.
Example
38
469
Advertisement
Table of Contents
