IGMP Snooping Commands
ip igmp snooping vlan forward-all
ip igmp snooping vlan forward-all
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Default Configuration
No port is configured as a member of a static Mrouter port.
Command Mode
Global Configuration mode
User Guidelines
You can execute the command before the VLAN is created.
You can register an entry without specifying an interface.
Using the no command without a port list removes the entry.
Example
switchxxxxxx(config)# ip igmp snooping vlan 1 mrouter interfaces gi1
To enable the IGMP Snooping forward-all static port processing on a VLAN, use
the ip igmp snooping vlan forward-all Global Configuration mode command.
To disable this feature, use the no form of this command.
Syntax
ip igmp snooping vlan
no ip igmp snooping vlan
Parameter
•
VLAN-LIST
—A VLAN ID or a list of VLAN IDs. (Range: 1 to 4094)
interface-id—
•
interfaces
The interfaces can be one of these types: Ethernet port or port channel.
Default Configuration
N/A
VLAN-LIST
forward-all interfaces
VLAN-LIST
forward-all interfaces
Specifies an interface ID or a list of interface IDs.
13
interface-id
interface-id
215