Table of Contents
Advertisement
IP Addressing Commands
show ip
show ip
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Name/address lookup is enabled
Default Domain Table
Domain
--------------------------------------------- --------- ----------
Name Server Table
IP Address
--------------------------------------------- --------- ----------
Cache Table
Flags: (STA, OK)
STA - Static
OK - Okay
Host
------------------------- ------------------------ --------- --------
To display the IP address of the management VLAN, use the show ip Privileged
EXEC mode command.
Syntax
show ip
Parameters
N/A
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show ip
Source
Source
IP Address
14
Preference
Preference
Type
State
234
Advertisement
Table of Contents
