Cisco 220 Series Smart Plus Reference Manual page 521

TACACS+ Commands
tacacs-server host
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
priority
• priority
where 0 is the highest priority and will be used first. If the switch cannot
establish a session with the highest priority server, the switch will try the
next priority server. (Range: 0 to 65535)
timeout
• timeout
before the connection between the switch and the TACACS+ server times
out. (Range: 1 to 30)
Default Configuration
No TACACS+ host is specified.
If key-string is not specified, the global value (set in the tacacs-server default-
param command) is used.
If timeout is not specified, the global value (set in the tacacs-server default-param
command) is used.
If a parameter was not set in one of the above commands, the default for that
command is used. For example, if a timeout value was not set in the current
command or in the tacacs-server default-param command, the default timeout set
in the tacacs-server default-param command is used.
Command Mode
Global Configuration mode
User Guidelines
Multiple tacacs-server host commands can be used to specify multiple hosts.
Example
switchxxxxxx(config)# tacacs-server host tacassrv1 priority 20 timeout 20
—(Optional) Specifies the priority of the TACACS+ server,
—(Optional) Specifies the number of seconds that passes
37
465