Passwords Aging - Cisco 220 Series Smart Plus Reference Manual

AAA Commands

passwords aging

passwords aging
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To enforce the password aging, use the passwords aging Global Configuration
mode command.
To revert to its default setting, use the no form of this command.
Syntax
days
passwords aging
no passwords aging
Parameters
days
• —The number of days before a password change is forced. The value
of zero means disabling aging. (Range: 0 to 365)
Default Configuration
The number of days is 180.
Command Mode
Global Configuration mode
User Guidelines
Aging is relevant only to local users with the privilege level 15.
To disable the password aging, use passwords aging 0. Using no passwords
aging restores the aging time to its default setting.
Example
The following example configures the aging time to 24 days:
switchxxxxxx(config)# passwords aging 24
3
58