Table of Contents
Advertisement
User Interface Commands
banner exec
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To set the EXEC banner, use the banner exec Global Configuration mode
command.
To delete the EXEC banner, use the no form of this command.
Syntax
delimiter
banner exec
no banner exec
Parameters
delimiter
•
—The text message that is preceded and followed by the same
single-character delimiter. The message is maximum 2000 characters long
and should be typed in from a new line.
Default Configuration
N/A
Command Mode
Global Configuration mode
User Guidelines
The EXEC banner shows at the left top of the Getting Started page when users log
in to the switch's web-based interface or on the command-line interface when
users log in to the switch's command-line interface.
Example
The following example sets the EXEC banner, including the hostname, system
contact, system location, and MAC address of the switch:
39
477
Advertisement
Table of Contents
