Show Security-Suite Dos Interfaces - Cisco 220 Series Smart Plus Reference Manual

Security DoS Commands

show security-suite dos interfaces

show security-suite dos interfaces
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To show the DoS protection and gratuitous ARP protection status per interface,
use the show security-suite dos interfaces Privileged EXEC Mode command.
Syntax
show security-suite dos interfaces
Parameters
• interface-id —An interface ID or a list of interface IDs.
Command Mode
Privileged EXEC Mode
Example
switchxxxxxx# show security-suite interface gi1-3
Port | DoS Protection | Gratuitous-ARP
----------+----------------+----------------
gi1 | enabled
gi2 | disabled
gi3 | disabled
interface-id
| enabled
| disabled
| disabled
31
428