Table of Contents
Advertisement
Line Commands
password-thresh
password-thresh
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Example
The following example configures the switch as a virtual terminal for remote
access (Telnet):
switchxxxxxx(config)# line telnet
switchxxxxxx(config-line)#
To set the login password intrusion threshold, use the password-thresh Line
Configuration mode command.
Syntax
value
password-thresh
Parameters
value
•
—The number of allowed password attempts. (Range: 0 to 120, 0
indicates no threshold)
Default Configuration
The default threshold value is 0, which indicates no threshold.
Command Mode
Line Configuration mode
Example
switchxxxxxx(config)# line console
switchxxxxxx (config-line)# password-thresh 10
21
313
Advertisement
Table of Contents
