Chapter 8: Clock Commands; Clock Set - Cisco 220 Series Smart Plus Reference Manual

Clock Commands

clock set

Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To manually set the system clock, use the clock set Privileged EXEC mode
command.
Syntax
HH:MM:SS month day year
clock set
Parameters
HH:MM:SS
• —The current time in hours (military format), minutes, and
seconds. (Range: HH: 0 to 23, MM: 0 to 59, SS: 0 to 59)
• month —The current month using the first three letters of the month name.
(Range: jan–dec)
day
• —The current day of the month. (Range: 1 to 31)
year
• —The current year. (Range: 2000 to 2037)
Command Mode
Privileged EXEC mode
Example
The following example sets the system time to 13:32:00 on August 7, 2014:
switchxxxxxx# clock set 13:32:00 aug 7 2014
13:32:00 DFL(UTC+8) Aug 07 2014
8
124