Cisco 220 Series Smart Plus Reference Manual page 500

Syslog Commands
show logging
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Logging service is enabled
TARGET | STATUS
----------+----------+---------------------------------+----------+---------
buffered | enabled |
crit, error, warning, notice, info, debug
flash | disabled |
g, notice
The following table describes the significant fields shown in the example:
Field
TARGET
STATUS
Server (PORT)
FACILITY
LOG LEVEL
Example 2—The following example shows information of the SYSLOG messages
stored in the RAM:
switchxxxxxx# show logging buffered
NO.| Timestamp
---------------------+----------------+----------+--------------------------
--------------
1| Jan 01 14:31:24|
privileged mode from console with level '15' success
2| Jan 01 14:31:22|
with privilege level 15
3| Jan 01 14:31:22|
console success
4| Jan 01 14:20:40|
privileged mode from telnet with level '15' success
5| Jan 01 14:20:38|
with privilege level 15
6| Jan 01 14:20:38|
telnet success
7| Jan 01 00:30:43|
privileged mode from telnet with level '15' success
| Server (PORT)
Description
Where the log messages are stored.
Shows whether RAM memory logging or flash
memory logging is enabled or disabled.
Server address and port number for SYSLOG
messages.
What kind of events are logged.
Severity level of messages to be logged.
Log messages in buffered
| Category | Severity |
AAA|
AAA|
AAA|
AAA|
AAA|
AAA|
AAA|
| FACILITY | LOG LEVEL
| |emerg, alert,
| |error, warnin
Message
info| User 'cisco' enter
info| User 'cisco' is authorized
info| User 'cisco' login from
info| User 'cisco' enter
info| User 'cisco' is authorized
info| User 'cisco' login from
info| User 'cisco' enter
35
459