Gvrp Registration-Mode - Cisco 220 Series Smart Plus Reference Manual

GVRP Commands

gvrp registration-mode

gvrp registration-mode
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Command Mode
Interface Configuration (Ethernet, port channel) mode
User Guidelines
An access port does not dynamically join a VLAN because it is always a member
of a single VLAN. Membership in an untagged VLAN is propagated in the same
way as in a tagged VLAN. That is, the PVID must be manually defined as the
untagged VLAN ID.
Example
switchxxxxxx(config)# interface gi6
switchxxxxxx(config-if)# gvrp enable
To deregister all dynamic VLANs on an interface and prevent VLAN creation or
registration on the interface, use the gvrp registration-mode Interface
Configuration mode command.
Syntax
gvrp registration-mode {fixed | forbidden | normal}
Parameters
• fixed—Specifies the fixed mode.
• forbidden—Specifies the forbidden mode.
• normal—Specifies the normal mode.
Default Configuration
Normal mode
Command Mode
Interface Configuration (Ethernet, Port Channel) mode
12
180