Table of Contents
Advertisement
User Interface Commands
end
end
enable
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To end the current configuration session and return to the Privileged EXEC mode,
use the end command.
Syntax
end
Parameters
N/A
Default Configuration
N/A
Command Mode
N/A
Example
The following example ends the Global Configuration mode session and returns to
the Privileged EXEC mode:
switchxxxxxx(config)# end
switchxxxxxx#
To enter the Privileged EXEC mode, use the enable Privileged EXEC mode
command.
Syntax
privilege-level
enable [
Parameters
privilege-level
•
Default Configuration
The default privilege level is 15.
]
—(Optional) The privilege level (1 or 15) to enter.
39
482
Advertisement
Table of Contents
