Chapter 42: Web Server Commands; Ip Http Secure-Server - Cisco 220 Series Smart Plus Reference Manual

Web Server Commands

ip http secure-server

Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To enable the HTTPS service on the switch, use the ip http secure-server Global
Configuration mode command.
To disable the HTTPS service on the switch, use the no form of this command.
Syntax
ip http secure-server
no ip http secure-server
Parameters
N/A
Default Configuration
The HTTPS service is enabled by default.
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)# ip http secure-server
42
471