Table of Contents
Advertisement
IGMP Snooping Commands
show ip igmp max-group
show ip igmp max-group
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
fa21 : None
fa22 : None
fa23 : None
fa24 : None
gi1 : None
gi2 : None
po1 : None
po2 : None
po3 : None
po4 : None
po5 : None
po6 : None
po7 : None
po8 : None
To display the maximum number of IGMP groups on a specific interface or all
interfaces, use the show ip igmp max-group Privileged EXEC mode command.
Syntax
show ip igmp max-group [interfaces
Parameters
interface-id
•
interfaces
interface IDs. The interfaces can be one of these types: Ethernet port or
port channel.
Command Mode
Privileged EXEC mode
User Guidelines
If no interface is specified, the information for all interfaces is displayed.
Example
switchxxxxxx# show ip igmp max-group interfaces fa5
Port ID
|
Max Group
---------+--------------
fa5 : 512
interface-id
]
—(Optional) Specifies an interface ID or a list of
13
218
Advertisement
Table of Contents
