Table of Contents
Advertisement
QoS Commands
show qos map
show qos map
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Command Mode
Privileged EXEC mode
User Guidelines
If a specific interface is not specified, information for all interfaces is displayed.
Example
switchxxxxxx# show qos interface gi1
Port|CoS|Trust State|Remark Cos|Remark DSCP|Remark IP Prec
----+---+-----------+----------+-----------+----------------
gi1 | 0 |
enabled
To show information for various types of QoS mapping, use the show qos map
Privileged EXEC mode command.
Syntax
show qos map [{cos-queue | dscp-queue | ip-precedence-queue | queue-cos |
queue-dscp | queue-precedence}]
Parameters
•
cos-queue—(Optional) Displays the CoS-to-queue mapping.
•
dscp-queue—(Optional) Displays the DSCP-to-queue mapping.
•
ip-precedence-queue—(Optional) Displays the IP precedence-to-queue
mapping.
•
queue-cos—(Optional) Displays the queue-to-CoS mapping.
•
queue-dscp—(Optional) Displays the queue-to-DSCP mapping.
•
queue-precedence—(Optional) Displays the queue-to-precedence
mapping.
Default Configuration
N/A
| disabled |
disabled |
28
disabled
406
Advertisement
Table of Contents
