Table of Contents
Advertisement
System Management Commands
reload
reload
show cpu input rate
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Pinging 3003::11 with 64 bytes of data:
64 bytes from 3003::11: icmp_seq=1. time=0 ms
64 bytes from 3003::11: icmp_seq=2. time=50 ms
64 bytes from 3003::11: icmp_seq=3. time=0 ms
64 bytes from 3003::11: icmp_seq=4. time=0 ms
----3003::11 PING Statistics----
4 packets transmitted, 4 packets received, 0% packet loss
round-trip (ms) min/avg/max = 0/12/50
To reload the operating system, use the reload Privileged EXEC mode command.
Syntax
reload
Parameters
N/A
Default Usage
N/A
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# reload
Proceed with reload? [confirm]
To show the current rate of input frames to CPU, use the show cpu input rate
Privileged EXEC mode command.
Syntax
show cpu input rate
36
454
Advertisement
Table of Contents
