IP DHCP Snooping Commands
show ip dhcp snooping
show ip dhcp snooping
show ip dhcp snooping binding
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To display the DHCP snooping configuration, use the show ip dhcp snooping
Privileged EXEC command.
Syntax
show ip dhcp snooping
Parameters
N/A
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show ip dhcp snooping
DHCP Snooping
Enable on following Vlans : None
Verification of hwaddr
Insertion of option 82
circuit-id default format: vlan-port
remote-id:
To display the DHCP snooping binding configuration for all interfaces, use the
show ip dhcp snooping binding Privileged EXEC mode command.
Syntax
show ip dhcp snooping binding
Parameters
N/A
Command Mode
Privileged EXEC mode
: enabled
: disabled
: disabled
: vlan1_md_fa11
16
259