Cisco 220 Series Smart Plus Reference Manual page 436

Smart plus switches command line interface
Hide thumbs Also See for 220 Series Smart Plus:
Table of Contents

Advertisement

RMON Commands
show rmon statistics interfaces
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
etherStatsFragments
etherStatsJabbers
etherStatsCollisions
etherStatsPkts64Octets
etherStatsPkts65to127Octets
etherStatsPkts128to255Octets
etherStatsPkts256to511Octets
etherStatsPkts512to1023Octets
etherStatsPkts1024to1518Octets
The following table describes the significant fields shown in the example:
Field
Dropped Events
Octets
Packets
Broadcast Packets
Multicast Packets
CRC Align Errors
Undersize Packets
: 0
: 0
: 0
: 1848
: 218
: 170
: 25
: 0
: 0
Description
Total number of events in which packets were
dropped by the probe due to lack of resources. Note
that this number is not necessarily the number of
packets dropped. It is the number of times that this
condition was detected.
Total number of octets of data (including those in bad
packets) received on the network (excluding framing
bits but including FCS octets).
Total number of packets (including bad packets,
broadcast packets, and multicast packets) received.
Total number of good packets received and directed to
the broadcast address. This does not include multicast
packets.
Total number of good packets received and directed to
a multicast address. This number does not include
packets directed to the broadcast address.
Total number of packets received with a length
(excluding framing bits, but including FCS octets) of
between 64 and 1518 octets, inclusive, but with either
a bad Frame Check Sequence (FCS) with an integral
number of octets (FCS Error) or a bad FCS with a non-
integral number of octets (Alignment Error).
Total number of packets received, less than 64 octets
long (excluding framing bits, but including FCS octets)
and otherwise well formed.
30
386

Advertisement

Table of Contents
loading

Table of Contents